Enterprise Wi-Fi validation performed by anyone on-site

Sidos Deep Survey validates Wi-Fi across hundreds or thousands of locations using a repeatable, 10-second, guided workflow, with centralized expert analysis in Sidos Cloud.

Request Demo

The Expert Stays. The Sidos Wave Travels.

Define the survey locations, send the Sidos Wave to any site, let anyone capture the data, and have your experts review and monitor everything centrally.

  1. Placing validation pins on a floor plan in Sidos Cloud

    Your experts define the plan

    Your network team places location pins in Sidos Cloud to set exactly where Wi-Fi performance must be validated. One blueprint, reused at every site.

  2. A Deep Survey syncing to a Sidos Wave device

    The plan syncs to a Wave

    The Deep Survey is assigned to a Sidos Wave. After a quick sync every test location appears on the device, and it ships to the site ready to use.

  3. Capturing a measurement on the Sidos Wave touchscreen

    Anyone on-site captures the data

    The person on-site walks to each location, taps the pin on the touchscreen, and the Wave captures a full measurement set in about 10 seconds. No Wi-Fi training, no configuration.

  4. Reviewing Deep Survey results and heat maps in Sidos Cloud

    Your experts review every site

    Results sync back to Sidos Cloud, where your experts review heat maps, detailed metrics, differential results, and Pass/Fail ratings against your validation profiles.

No-compromise, cost-effective Wi-Fi validation

Deep Surveys lower the cost of validating your sites, make the process fully repeatable, and give you better visibility, so issues surface before they reach your operations.


  • Lower cost of validation

    Reduce time and cost by removing expert travel from the process. Anyone already at the site can collect the data.


  • Repeatable at any scale

    The same expert-defined workflow runs at every location, so results stay consistent and comparable across your estate.


  • Proactive issue detection

    Validating more often, and more consistently, surfaces performance problems earlier, while they are still cheap to fix.

Sidos Wave devices validating Wi-Fi across production, warehouse, and store sites

Empower your team to do more

Deep Surveys empower your team by enabling experts to focus on higher-impact work, enforce consistent standards, and maintain the visibility needed to manage your network proactively.

Deep Survey results from every site, centralized in Sidos Cloud

  • Do more with the team you already have

    Deep Survey reduces the need for your core team to travel, freeing your experts to focus on more value-added tasks.


  • Faster, better decision-making

    Experts get consistent data from each site, removing guesswork and accelerating problem diagnosis and troubleshooting.


  • Stronger visibility across your network

    Deep Survey centralizes results from every site, giving your team clearer insight into trends and emerging issues before they become disruptions.

Two survey methods, one complete picture

Deep Surveys provide continuous validation and can be used on their own, with extra capability unlocked when they are combined with classic site surveys.

Classic site surveys Sidos Deep Survey
Primary purpose Detailed RF assessment for design, optimization, or major troubleshooting. Fast, repeatable validation of real-world performance against a defined standard.
Who performs it Wi-Fi experts and trained technicians. Anyone on-site: techs, installers, contractors, or any non-expert staff.
Skill level required High. Requires prior knowledge of survey techniques. Low. Guided workflow and automated measurement.
Role in your workflow Provides deeper RF insight and can serve as a reference point or baseline. Works standalone, or compares against classic surveys and prior Deep Surveys.
Data collected Full heat maps of RF coverage, interference analysis, and AP placement insight. Pin-based measurements with deep real-world detail at each location, plus AI-generated heat maps.
Speed of collection Slower. Requires walking the entire site. About 10 seconds per pin.
Scalability Scaling requires expert travel and time on-site. Scales to hundreds of sites by sending the device instead of the expert.
Training burden High. Requires formal training and experience. Minimal. Learned in minutes with guided workflows.
Cost High. Dependent on specialized labor and travel. Low ongoing cost per survey.
Best for Designing networks, validating new builds, solving complex RF issues, periodic baselines. Validating networks, catching drift, detecting change over time, proactive assurance.
Working together Provides the detailed baseline Sidos AI uses to build an accurate digital twin. A few pins can be compared against that baseline, and Sidos AI can generate full heat maps from them.

Why Deep Survey is different


  • Distributed data collection

    Guided workflows let non-experts collect consistent, repeatable measurements in real-world environments, with no RF training and no travel.


  • Centralized expert control

    Experts define the survey locations, thresholds, and validation rules, then review results across every site from one place.


  • Continuous visibility over time

    Frequent Deep Surveys reveal change over time, feed AI-generated heat maps, and surface issues early, before users feel them.

Everything you need to understand every site

See coverage, verify configuration, track changes, and drill into individual pin locations without being on-site.

  • Comparing Deep Survey coverage against a classic survey baseline

    See and compare real-world performance

    Compare Deep Survey data against your classic survey or digital twin to reveal changes in coverage, and spot the areas that need attention at any location.

  • A Deep Survey validation profile evaluating each location

    Verify each site against expert-defined profiles

    Deep Surveys evaluate every location's configuration and RF health automatically. Track compliance over time and pinpoint issues before they affect users.

  • Drilling into BSSID-level detail for a single pin location

    Drill into any location for full technical detail

    BSSID-level insight, RSSI, channel usage, SNR, throughput estimates, and more. Your experts get the full context without setting foot on-site.

What every survey validates

  • Received signal level (RSSI)
  • 2.4 GHz channel usage
  • Channel width usage
  • Authentication modes
  • 802.11w management frame protection usage
  • 802.11r fast transition usage
  • Radio transmit power
  • Minimum basic rates
  • 802.11v band steering
  • Supported bands
  • Minimize SSID count
  • Compliant country code
  • 802.11e quality of service capability
  • Hidden SSIDs
  • AP reported channel utilization
  • 802.11k neighbor reporting
  • 802.11k reduced neighbor reporting
  • AP reported beacon interval
  • Clients per radio
  • Wi-Fi multimedia (WMM)

Ready to see Sidos in action?

Whether you survey one site or hundreds, Sidos has the hardware, software, and reporting tools to help your team work smarter.
Get Started See Pricing

Trusted by Fortune 10 enterprises to independent consultants, in 30+ countries.

Enterprise IT Healthcare Retail Education Manufacturing Hospitality Public Sector